#! /usr/bin/php-cgi 創造工学センター 講習会申込みフォーム: Application form to training workshop

創造工学センター 講習会 申込みフォーム
Application form to training workshop

参加者氏名の確認はこちらから(学内限定)
List of participants can be found here (only accessible from Tohoku Univ.).

2023年6月実施分の講習会の申し込み受付中です。

下記講習会名をクリックすると、各講習会の詳細が開きますので、受講したい講習会を選択してください(複数選択可)
先着順となります。受講者数が定員に達していないか確認のうえ、空いている日程でお申込みください。
なお、受講決定後、講習会を無断欠席した場合、翌月にお申込みいただいても今まで申込をいただいていない方を優先して受付を行います。
体調不良や予定が変わり講習会に出席できなくなった場合は、早めに創造工学センターにご連絡ください。
Clicking the name of each course shows the details. Choose the date from the left column.
Application is accepted in order of arrival. You can apply multiple types of courses at one time.
If you are absent without notice, priority will be given to those who have not yet registered for the next month's workshop, even if they have applied for the next month's workshop.
If you are unable to attend the seminar due to illness or a change in plans, please contact the Innovation Plaza as soon as possible.
  • 匠の心: Craftsmanship【M】 

    • 講習に参加する前にオンデマンドで資料を確認すること/Please review the material online before participating in the workshop.
    • 時間/ Training time:約2時間×2回(旋盤・フライス盤 各1回)で修了 / Two 2 hours (lathe and milling machine 1 time each)
    • 場所/ Place:機械加工室 / Machine Process (2F)
    • 定員 / Limit:各回2名 / each time 2 person
    • 匠の心に申込む場合、旋盤コース・フライス盤コース、どちらも受講してください。
      「機械加工室の安全講習」をオンデマンドで実施します。確認テストで100点を取っていない場合は、対面講習を実施できません。
      Both ”旋盤/lathe” and ”フライス盤/milling machine” courses should be taken to get the Craftsmanship license [M].
      ”Safety training in the machining room” on demand (written in Japanese). If you don't get 100 points in the confirmation test, you can't take face-to-face lessons.
    • 受講方法は「講習会受講方法」のファイルをご確認ください。/ Please check the PDF file for how to attend the lecture.
    申し込み
    Application
    講習会名
    Course name
    実施日
    Date
    実施時間
    Time
    受講者
    Member
    M1(旋盤: lathe)2023/5/9(火)13:30~15:302/2
    満員: Full
    M2(フライス盤: milling machine)2023/5/12(金)13:30~15:301/1
    満員: Full
    M3(フライス盤: milling machine)2023/5/16(火)13:30~15:302/2
    満員: Full
    M4(旋盤: lathe)2023/5/19(金)13:30~15:301/1
    満員: Full
    M5(旋盤: lathe)2023/5/22(月)13:30~15:302/2
    満員: Full
    M6(フライス盤: milling machine)2023/5/29(月)13:30~15:302/2
    満員: Full
    M7(旋盤: lathe)2023/6/6(火)13:30~15:302/2
    満員: Full
    M8(フライス盤: milling machine)2023/6/13(火)13:30~15:302/2
    満員: Full
    M9(旋盤: lathe)2023/6/16(金)13:30~15:302/2
    満員: Full
    M10(フライス盤: milling machine)2023/6/21(水)9:30~11:302/2
    満員: Full
    M11(フライス盤: milling machine)2023/6/23(金)13:30~15:302/2
    満員: Full
    M12(旋盤: lathe)2023/6/28(水)9:30~11:302/2
    満員: Full
  • 万能試験機の操作手順: Universal testing【A】 

    • 講習に参加する前にオンデマンドで資料を確認すること/Please review the material online before participating in the workshop.
    • 時間 / Training time:約1時間で修了/ 1 hour
    • 場所/ Place:材料実験室 /Material Lab (2F)
    • 定員/ Limit:各回4名/ each time 4 person
    • 受講方法は「講習会受講方法」のファイルをご確認ください。/ Please check the PDF file for how to attend the lecture.
    申し込み
    Application
    講習会名
    Course name
    実施日
    Date
    実施時間
    Time
    受講者
    Member
    A12023/6/7(水)11:00~12:003/4
    A22023/6/22(木)16:00~17:001/4
  • バンドソー: Metal Cutting Band Saw【B】 

    • 講習に参加する前にオンデマンドで資料を確認すること/Please review the material online before participating in the workshop.
    • 時間 / Training time:約30分で修了/ 30 minutes
    • 場所/ Place:材料調整室 /Machining Process room (2F)
    • 定員/ Limit:各回2名/ each time 2 person
    • 受講方法は「講習会受講方法」のファイルをご確認ください。/ Please check the PDF file for how to attend the lecture.
    申し込み
    Application
    講習会名
    Course name
    実施日
    Date
    実施時間
    Time
    受講者
    Member
    B12023/5/17(水)10:30~11:002/2
    満員: Full
    B22023/5/25(木)15:00~15:302/2
    満員: Full
    B32023/5/31(水)10:30~11:002/2
    満員: Full
    B42023/6/8(木)10:30~11:002/2
    満員: Full
    B52023/6/19(月)15:00~15:302/2
    満員: Full
    B62023/6/30(金)10:30~11:000/2
  • 3Dリアルサーフェスビュー顕微鏡:SEM【S】 

    • 時間/ Training time:約1時間で修了 / 1 hour
    • 場所/ Place:材料実験室 /Material Lab (2F)
    • 定員/ Limit:各回3名/ each time 3 person
    講習を希望する方は、創造工学センターまでメールをお送りください。/If you would like to apply for the course, please send an email to the Innovation Plaza.
    E-mail: hatumei@grp.tohoku.ac.jp
    申し込み
    Application
    講習会名
    Course name
    実施日
    Date
    実施時間
    Time
    受講者
    Member
  • レーザーカッター講習: Laser material processing【L】 

    • 講習に参加する前にオンデマンドで資料を確認すること/Please review the material online before participating in the workshop
    • 時間/ Training time:約30分 / 30 minutes
    • 場所/ Place:材料実験室/ Material Lab (2F)
    • 定員 / Limit:各回4名 / each time 4 person
    • 受講方法は「講習会受講方法」のファイルをご確認ください。/ Please check the PDF file for how to attend the lecture.
    申し込み
    Application
    講習会名
    Course name
    実施日
    Date
    実施時間
    Time
    受講者
    Member
    L12023/5/10(水)10:00~10:304/4
    満員: Full
    L22023/5/18(木)10:00~10:304/4
    満員: Full
    L32023/5/25(木)16:00~16:304/4
    満員: Full
    L42023/5/30(火)10:00~10:304/4
    満員: Full
    L52023/6/5(月)10:00~10:303/4
    L62023/6/15(木)10:00~10:304/4
    満員: Full
    L72023/6/20(火)10:00~10:304/4
    満員: Full
    L82023/6/28(水)16:00~16:300/4
  • 3Dプリンタ講習: 3D printing【P】 

    • 講習に参加する前にオンデマンドで資料を確認すること/Please review the material online before participating in the workshop
    • 時間/ Training time:約30分 / 30 minutes
    • 場所/ Place:デジタル造形室/ Digital Prototyping (1F)
    • 定員 / Limit:各回4名 / each time 4 person
    • 受講方法は「講習会受講方法」のファイルをご確認ください。/ Please check the PDF file for how to attend the lecture.
    申し込み
    Application
    講習会名
    Course name
    実施日
    Date
    実施時間
    Time
    受講者
    Member
    P12023/5/10(水)11:00~11:304/4
    満員: Full
    P22023/5/18(木)11:00~11:304/4
    満員: Full
    P32023/5/25(木)15:00~15:304/4
    満員: Full
    P42023/5/30(火)11:00~11:304/4
    満員: Full
    P52023/6/5(月)11:00~11:304/4
    満員: Full
    P62023/6/15(木)11:00~11:304/4
    満員: Full
    P72023/6/20(火)11:00~11:304/4
    満員: Full
    P82023/6/28(水)15:00~15:304/4
    満員: Full
  • カッティングプロッタ講習会:Cutting plotter【C】 

    • 講習に参加する前にオンデマンドで資料を確認すること/Please review the material online before participating in the workshop
    • 時間/ Training time:約30分 / 30 minutes
    • 場所/ Place:材料実験室/ Material Lab (2F)
    • 定員 / Limit:各回4名 / each time 4 person
    • 受講方法は「講習会受講方法」のファイルをご確認ください。/ Please check the PDF file for how to attend the lecture.
    申し込み
    Application
    講習会名
    Course name
    実施日
    Date
    実施時間
    Time
    受講者
    Member
    The period endsC12023/5/10(水)10:30~11:00
    C22023/5/18(木)10:30~11:003/3
    満員: Full
    C32023/5/25(木)15:30~16:003/4
    C42023/5/30(火)10:30~11:003/4
    C52023/6/5(月)10:30~11:000/4
    C62023/6/15(木)10:30~11:000/4
    C72023/6/20(火)10:30~11:000/4
    C82023/6/28(水)15:30~16:000/4

※「その他」を選択した方は「その他の特記事項」欄に所属を記入してください。
If you choose “other”, please input your Department in “その他の特記事項/Other” box.

@.tohoku.ac.jp
※オンデマンドでの講習会にはGoogle Classroomを利用するため、東北大メールを入力してください。 / We use Google Classroom for on-demand classes. Please input your TU Mail address.